Structural and Thermal Characterization of Boron-Doped Nano TiO2: Hydrothermal Synthesis for Flame-Retardant Nanomaterials
Açar sözlər
Nano TiO2, Boron Doping, Hydrothermal Synthesis, Anatase, Flame Retardancy, Thermal Characterization, XRD, SEMXülasə
In this study, the structural, morphological, and thermal effects of doping nano-sized titanium dioxide (TiO2) with two distinct boron sources—boron oxide (B2O3) and boric acid (H3BO3)—were systematically investigated. Synthesis was performed via the hydrothermal method in a PTFE-lined autoclave reactor at 200 °C for 4 hours. Comprehensive characterization of the resulting nanomaterials was conducted using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and thermogravimetric/differential scanning calorimetry (TGA/DSC) analysis. XRD results confirmed that the TiO2 matrix retained its anatase crystal structure in both doping approaches. SEM images revealed grain sizes in the range of 96–97 nm for boron oxide-doped samples and 96–111 nm for boric acid-doped samples. EDS confirmed the successful integration of dopant elements (B, O, Ti) into the structure. TGA/DSC data verified endothermic phase transitions at ~228 °C for B2O3-doped samples and below 200 °C for H3BO3-doped samples, fully consistent with the B2O3–H2O phase diagram. The findings demonstrate that boron doping renders TiO2 nanostructures a promising material for flame-retardant textile applications
Referanslar
[1] Fujishima, A., Honda, K. (1972). Electrochemical photolysis of water at a semiconductor electrode. Nature, 238(5358), 37–38.
[2] Linsebigler, A.L., Lu, G., Yates, J.T. (1995). Photocatalysis on TiO₂ surfaces: principles, mechanisms, and selected results. Chemical Reviews, 95(3), 735–758.
[3] Chen, X., Mao, S.S. (2007). Titanium dioxide nanomaterials: synthesis, properties, modifications, and applications. Chemical Reviews, 107(7), 2891–2959.
[4] Hanaor, D.A.H., Sorrell, C.C. (2011). Review of the anatase to rutile phase transformation. Journal of Materials Science, 46(4), 855–874.
[5] Bhave, R.C., Lee, B.I. (2007). Experimental variables in the synthesis of brookite phase TiO₂ nanoparticles. Materials Science and Engineering A, 467(1–2), 146–149.
[6] Asahi, R., Morikawa, T., Ohwaki, T., Aoki, K., Taga, Y. (2001). Visible-light photocatalysis in nitrogen-doped titanium oxides. Science, 293(5528), 269–271.
[7] Zhao, W., Ma, W., Chen, C., Zhao, J., Shuai, Z. (2004). Efficient degradation of toxic organic pollutants with Ni₂O₃/TiO₂xBx under visible irradiation. Journal of the American Chemical Society, 126(15), 4782–4783.
[8] In, S., Orlov, A., Berg, R., García, F., Pedrosa-Jimenez, S., Tikhov, M.S., Armstrong, D., Lambert, R.M. (2007). Effective visible light-activated B-doped and B,N-codoped TiO₂ photocatalysts. Journal of the American Chemical Society, 129(45), 13790–13791.
[9] Liu, G., Zhao, Y., Sun, C., Li, F., Lu, G.Q., Cheng, H.M. (2008). Synergistic effects of B/N doping on the visible-light photocatalytic activity of mesoporous TiO₂. Angewandte Chemie International Edition, 47(24), 4516–4520.
[10] Finnie, K.S., Bartlett, J.R., Woolfrey, J.L. (1999). Boron-containing titania sol–gel films: effect of B₂O₃ on crystallisation. Journal of Materials Chemistry, 9(7), 1681–1685.
[11] Yoshimura, M., Byrappa, K. (2008). Hydrothermal processing of materials: past, present and future. Journal of Materials Science, 43(7), 2085–2103.
[12] Imanov, H., Jafarli, M., Mahmudov, S., & Karimova, S. (2025). Investigation of the Conditions for Obtaining the Silver Thioarsenate Compound from the AgNO3-As2S5-H2O System and Investigation of the Properties of the Obtained Silver Thioarsenate Compound. 1600-1612.
[13] Imanov, H., & Jafarli, M. (2025). Investigation of the interaction conditions of As2S5 and CuCl2 compounds in water and ethylene glycol medium. Turkish Journal of Chemistry, 49(2), 204-214.
[14] Imanov, H., & Huseynov, Q. (2021). Investigation of the Acquisition Conditions of Tl3AsS4 Compound in the Aquatic Environment. Journal of the Turkish Chemical Society Section A: Chemistry, 8(2), 527-534.
[15] Imanov, H., & Huseynov, Q. (2020). Investigation of acquisition of triple sulfurs from Pb(CH3COO)2-Na3AsO4-H2S-H2O system by hydrochemical method. Journal of the Turkish Chemical Society Section B: Chemical Engineering, 3(2), 35-40.
[16] Imanov, H. A., & Huseynov, G. M. (2021). Study of the conditions for the acquisition of Tl3AsS4 in ethylene glycol. Kimya Problemleri, (3), 135-142.
[17] Əliyeva S.H., Hüseynov Q.M. (03-06 Mart 2020). Hidrokimyəvi metodla Tl3SbS4 birləşməsinin alınması // Seconda İnternational Scientific Conference of Young Scientists and Specialist SOCAR, p.315-317.
[18] Hüseynov Q.M., Əliyeva S.H. (2020). Hidrotermal şəraitdə TlSb+3(Sb+5)S-2-H2O sistemlərindən üçlü sulfidlərin alınması. Naxçıvan: AMEA Naxçıvan Bölməsi Elmi Əsərlər, Təbiət və Texniki Elmlər seriyası. 4, s.30-36.
[19] Алиева C.H. (2024). Исследование Условий Получения Тиостибиата Серебра(I) из системы Sb2S5-AgNO3-H2O. Международный научный журнал «Наука и Мир» Volgograd. 7 cild 131, c.20-26
[20] Adams, R.M. (1964). Boron, Metallo-Boron Compounds and Boranes. Interscience Publishers, New York.
[21] Venkatachalam, N. et al. (2007). Sol-gel preparation and characterization of nanosize TiO₂. Materials Chemistry and Physics, 104(2–3), 454–459.
[22] Scherrer, P. (1918). Bestimmung der Größe und inneren Struktur von Kolloidteilchen mittels Röntgenstrahlen. Nachrichten von der Gesellschaft der Wissenschaften zu Göttingen, 2, 98–100.
[23] Matthews, R.W. (1993). Photocatalytic purification and treatment of water and air. In: Ollis, D.F., Al-Ekabi, H. (Eds.), Elsevier, Amsterdam.
